|
hi, first of all, what exactly you want to repair. the front end or the whole compressor. if the clutch and coil are alright, you will need to buy a kit, for the internal parts. you'll need to remove the back cover (if it has screws on the back side) and then remove the piston shaft, just remember the position you took it out, the remove and replace the flapper, if the flapper don't come out, you will need to remove the front cover. first take out the clutch, and then the front cover. make sure you put new bearings and seal gaskets. i recommend to search on you-tube, sorry for the add, for proper repair. some tools you may need, snap ring pliers, and a damper puller. I know this is not as much information you may wanted, but something is better than nothing.
|
